Glove Bags

견적요청
제품상담 버튼을 클릭하시면 해당 제품에 대해 문의하실 수 있습니다.
판매자: 비티알
브랜드: ILC DOVER

AVAIL® glovebags enjoy the industry reputation of being the highest performing, easiest to use and safest method to remove asbestos insulation from pipe.

Single Glovebag

Single Glovebag

Extended-Run Glovebag

Extended-Run Glovebag

Vertical Glovebag

Vertical Glovebag

QuickTwist Glovebag

QuickTwist Glovebag

AVAIL® glovebags deliver the highest performance due to design features that save labor while increasing safety.

  • All AVAIL glovebags incorporate FiberGuard glove sleeves that insure an air and liquid tight seal at this critical connection point.
  • Proper positioning of the glovesleeves allows the operator to reach all areas of the pipe without having to support the weight of the bag and debris eliminating fatigue and increasing productivity.
  • Pre-cut tops with fitted collars eliminate the need to measure and cut the bag to fit the pipe and allows the bag to be easily and securely attached to the pipe without bunching.
  • Full six mil high clarity virgin polyethylene ensures strong seals and excellent puncture resistance as well as a clear view of the work area.

Downloadable Content

AVAIL® Glovebag Brochure

Download

AVAIL® QT Glovebag Brochure

Download

Glovebag Directional Instructional

Download

  • TECHNICAL SPECIFICATIONS

    Avail QuickTwist Glovebags

    *QT10
    *
    The QT10 fits pipe diameters up to 10″ in diameter and safely allows for a horizontal work area of approximately 48”.

    *QT14
    *
    When larger diameters of pipe are encountered, the QT14 is the next choice. It safely encloses pipe diameters from 10″ to 14″ in diameter and allows up to 60” of horizontal work area

    *QT18
    *
    The QT18 is designed for pipe diameters from 14″ to 18″ in diameter and provides a work area of approximately 66”. The QT18 incorporates 2 sets of glovesleeves for access to both sides of the pipe.

    *QT30
    *
    The QT30 glovebag handles pipe diameters from 18″ to 30″ and allows for up to 70” of horizontal work area. The QT30 incorporates 3 sets of glovesleeves to access the complete workarea comfortably.

    Avail Extended-Run Glovebags

    *4460 Ext
    *
    This economy model glovebag has all the features of the Avail line with the exception of entry ports. The bag is designed for pipe up to 8” in diameter and will safely provide a horizontal work area of approximately 24” per chamber.

    *5460 Ext
    *
    5460 EXT glovebag is the workhorse of the product line. The bag is designed to enclose pipe diameters up to 10” in diameter and will provide a horizontal work area of approximately 30” per chamber.

    *6072 Ext
    *
    The 6072 EXT glovebag will enclose pipe diameters up to 14″ in diameter and create a work area of about 40” per chamber.

    *6684-2 Ext
    *
    The 6684-2 EXT glovebag will enclose pipe diameters up to 18″ in diameter and create a work area of about 40” per chamber.

    Avail Vertical Glovebags

    *V10
    *
    The V10 sets the industry standard for efficiency on vertical pipe diameters up to 10”. The vertical glovebag provides approximately 3’ of vertical work area. An offset debris area moves the weight and bulk away from the work area and allows for easy and safe debris chamber removal. 6-mil construction.

    V24
    The V24 is designed for work on pipe diameters from 10” to 24”. The V24 creates a 4’ vertical work area. The offset debris area moves the weight and bulk away from the work area and allows for easy and safe debris chamber removal. The V24 offers two sets of glovesleeves for easy access to both sides of the pipe.

    GSV12
    This vertical glovesheet is designed for abatement on 12” diameter X 12’ risers. In addition to pipe insulation the GSV 12 can be used on ductwork and beams. Glovesheets can be connected using spray adhesive and tape for larger vertical pipe applications or to configure the product into a “glovewall”. The debris area is offset from the glovesheet and contains its own glovesleeve assembly. Flat dimensions are 8′ x 15′, and can safely enclose insulation diameters up to 12″, with a 12′ vertical work area. Six arm sets per unit. Available in 9 ml only.

    Avail Single Glovebags

    *4460
    *
    The basic Avail glovebag for small-scale jobs or simple repair and maintenance tasks or “wrap and cut” projects on pipe up to 8” in diameter.

    *5460
    *
    The 5460 Avail glovebag provides about 10” more horizontal work area than the 4460 and is designed for work on pipes up to 10” in diameter.

    *6072
    *
    The Avail 6072 is designed for use on pipes up to 14” in diameter.

    *6684-2
    *
    This glovebag is for use on pipe up to 18” in diameter and incorporates two arm sets per chamber that allow work from either side of the pipe allowing access to difficult to reach areas.

    *M6
    *
    The M6 dimensions are 22 inches by 60 inches with a 18 inch deep pre-cut opening at the top with collars to accommodate pipe diameters up to 6 inches and provide a horizontal work area of 12 inches. The glovesleeves are set opposing each other on the bag. The worker can easily manipulate tools inside the bag with both hands, and perform maintenance and repair activities with ease. The M6 glovebags are packaged 40 per case.

    *72120-2
    *
    This super-sized model is for 30” diameter pipes, valves or unique situations where smaller, standard bags just don’t fit the task.

    Avail Glovesheets – see Avail Glovebags brochure for more detail

    *GSH620-8-3
    *
    Designed for large horizontal ducts, beams and pipe. This mini-enclosure allows workers to safely contain awkwardly sized structures. Eight arm sets per unit make all surfaces in containment easily accessible. Three debris chambers/chutes channel waste away from the work area. Flat glovesheet dimensions are 20′ x 12′, folded dimensions are 20′ x 6′ which enclose duct, beam and pipe insulation diameters up to 30″, and can safely contain a 18′ horizontal work area. Available in 9 mil only.

    GSH1220-14-4
    This extra-large glovesheet enclosure is for very large ducts, beams, pipes and boilers. Fourteen armsets per unit make all surfaces in containment easily accessible. Four debris chambers/chutes channel waste away from the work area. Flat glovesheet dimensions are 20′ x 24′, folded dimensions are 20′ x 12′ which enclose insulation diameters up to 72″, and can safely contain an 18′ horizontal work area. Available in 9 mil only.


배송/결제/교환/반품 안내

배송 정보

기본 배송비
  • - 3,000원 (배송비 3,000원 + 부가세 300원)
  • - 10만원 이상 구매시 배송비 무료
  • - 도서산간 및 제주를 포함한 일부 지역 추가비용 발생
교환/반품 배송비
  • - 상품 별로 상이
착불 배송비
  • - 착불 적용 상품에 개별 부과 (상품 별로 상이)
  • - 착불 상품의 경우 판매처마다 배송을 할 수 있기 때문에 중복으로 착불비가 발생 가능
  • - 일반 상품과 함께 구매하더라도 해당 판매업체의 구매 금액에 따라 착불 배송비 발생 가능
교환/반품 배송비
  • - 상품 별로 상이

결제 및 환불 안내

결제 방법
  • - 신용카드
  • - 실시간 계좌이체
취소
  • - 취소 접수 후 3 ~ 5일 이내 환불 처리
반품
  • - 반품 접수 후 3 ~ 5일 이내 환불 처리

교환 및 반품 접수

교환 및 반품 접수 기한
  • - 상품 수령일로부터 7일 이내
교환 및 반품 접수가 가능한 경우
  • - 제품의 하자는 없지만, 다른 상품으로 교환하거나 반품 원하는 경우
     (배송비 고객 부담)
  • - 상품자체 불량 및 하자에 의한 경우
  • - 상품 오배송에 의한 경우
교환 및 반품 접수가 불가능한 경우
  • - 상품 수령 후 7일을 초과한 경우
  • - 개별 포장 상품의 포장을 훼손한 경우
  • - 고객의 고의적인 귀책으로 상품가치가 훼손된 경우
  • - 주문제작을 통해서 제품을 생산하는 경우
  • - 주문 당시 재고가 없어서 해외를 통해 제품을 수입해서 구매하는 경우

교환 및 반품 신청

교환 절차
  • - 상품 불량/오배송/상품파손
  • - 전화(02-585-1342) 또는 info@cacheby.com에 상품교환 접수
반품 절차
  • - 반품할 품목을 확인 후 info@cacheby.com로 반품 신청 (수령 후 7일 이내 가능하며 이후 불가)
  • - 전달드린 주문번호와 함께 반품 상품을 포장
     (포장을 꼼꼼하게 해주셔야 반품 상품 손상에 따른 불이익이 없습니다.)
  • - 택배회사 방문 시 반품 상품 전달
     (택배사의 반송장은 상품 교환이 완료될 때까지 보관해주시기 바랍니다.)

상품문의 0

비티알의 다른 상품들

thumbnail

VacciXcell offers a stand-alone capping machine, as the application of aluminium caps is a ‘dirty’ process, wherein many particulates are created. However, an integrated filling/stoppering/capping monoblock is feasible should the customer require it....

thumbnail

The Isoclean® Platform Isolator facilitates the isolation of a product or process while providing the required for sterile/aseptic environment. It is configured to operate at positive or negative pressure. This equipment provides a comprehensive rang...

thumbnail

Incorporating all the latest design features available on Esco's NSF-listed Labculture Class II Type A2 biosafety cabinet, Esco Labculture Class II Type B2 biosafety cabinets are designed to provide operator, products and environmental protection in ...

thumbnail

Crystal Violet Dye Nuclei Count Kit is a simple tool for the quantification of cells based on the number of nuclei dyed. The CVD kit contains reagents that disrupt the cells, ...

thumbnail

AVAIL glovebags deliver the highest performance due to design features that save labor while increasing safety. All AVAIL glovebags incorporate FiberGuard glove sleeves that insure an air and liquid tight seal at this critical connection point. Prope...