SL50-ACC06 Silicone Enclosure (Sinking)
SL50-ACC06 Silicone Protective Enclosure
The lowest cost waterproof enclosure for the SL50 series data loggers available in either packs of five or packs of ten.
The SL-ACC06 is constructed from neutral coloured silicone. This produces a lightweight, two part enclosure that protects the data logger at pressures up to 0.5 Bar or depths of 5m.
The maximum operating temperature is well in excess of the +140°C maximum operating temperature of the SL55T temperature data loggers.
The enclosure may be reused many times but the actual number of times depends upon many factors such as the temperature, the liquid type and the duration. Each time before use carefully inspect the cap for signs of damage and if in doubt discard.
Diameter 22.5mm, Length 25.0mm Weight: 5g excluding data logger
Please note, this item is not suitable for use in vacuum applications or in silicone oil. Please use SL50-ACC01SL50-ACC01
Specification
| Operating Temperature Range | -15°C to +140°C |
| Dimensions | Diameter 22.5mm, Length 25.0mm |
| Weight | 5g excluding data logger |
| Protection | Up to 0.5 Bar or 5m submersion |
| Response Time In Water | 63% Step Change: 90 Seconds 10% to 90% Step Change: 243 Seconds |
| Response Time In Air | 63% Step Change: 270 Seconds 10% to 90% Step Change: 545 Seconds |
배송/결제/교환/반품 안내
배송 정보
| 기본 배송비 |
| 교환/반품 배송비 |
|
|---|---|---|---|
| 착불 배송비 |
| ||
| 교환/반품 배송비 |
| ||
결제 및 환불 안내
| 결제 방법 |
|
|---|---|
| 취소 |
|
| 반품 |
|
| 환급 |
|
교환 및 반품 접수
| 교환 및 반품 접수 기한 |
|
|---|---|
| 교환 및 반품 접수가 가능한 경우 |
|
| 교환 및 반품 접수가 불가능한 경우 |
|
교환 및 반품 신청
| 교환 절차 |
|
|---|---|
| 반품 절차 |
|