CacheBy
Sartopore® 2 XLG | 0.2 µm | Maxicaps® (Production | Large Scale) (5448307G1G-SO)
AI 생성AI가 생성·보정한 이미지예요. AI는 실수할 수 있으니 실제 제품과 다를 수 있어요.
1 / 2

Sartopore® 2 XLG | 0.2 µm | Maxicaps® (Production | Large Scale) (5448307G1G-SO)

상품 한눈에 보기

대규모 생산용 0.2 µm 멸균 여과 Maxicaps® 0.8 µm 프리필터와 0.2 µm 최종 필터의 이중층 PES 멤브레인 제약·바이오 공정의 배지, 버퍼 및 다운스트림 중간체 여과 오토클레이브 및 감마선 조사 가능

브랜드
Sartorius
카테고리
Sterile Filters
판매단위
10"(0.8 m² / 8.6 ft²)
카탈로그 보기

카탈로그

1개 옵션
회원가입 없이 바로 구매하세요
가입하지 않아도 비회원가로 구매하실 수 있습니다.
Sartopore® 2 XLG | T-Style Maxicaps® | 0.2µm | 10", 10"(0.8 m² / 8.6 ft²) | Sartopore2 XLG T-Style Caps_0.2µm_10''판매 단위 10"(0.8 m² / 8.6 ft²) ·
재고 확인 필요
703,000원VAT 포함 773,300원

Sartorius · Sartopore® 2 XLG | 0.2 µm | Maxicaps® (Production | Large Scale) (5448307G1G-SO)

제품 개요

Sartopore® 2 XLG Maxicaps®는 대규모 생산을 위해 설계된 고용량 여과 제품입니다. 뛰어난 여과 용량과 효율을 제공하며, 까다로운 산업용 애플리케이션에서 안정적인 성능을 지원합니다.

Applications

항목 사양
Application High capacity platform for conventional sterile filtration
Industry Pharma / Biotech
Modality Media Filtration | Buffer & Auxiliaries Filtration | Downstream Intermediates | Filtration after Virus Inactivation | Form & Fill
Scale Production | Large Scale

제품 사양

항목 사양
Brand Sartopore® 2 XLG
Filter Size 10" (0.8 m² / 8.6 ft²)
Capsule/Cartridge Format T-Style Maxicaps®
Type T-Style (Autoclavable | γ-irradiatable)
Pore Size Final-filter 0.2 µm
Pore Size Pre-filter 0.8 µm
Membrane Material Polyethersulfone (PES)
Support Fleece Polyester (PET)
Housing Material Polypropylene (PP)
Material o-ring | seal Silicone (SI)
Pack Size 1
Delivery Condition Non-Sterile
Vent Valve Standard

연결부 및 압력 사양

항목 사양
Connector Inlet 1.5" Sanitary
Connector Outlet 1/2" Single Stepped Hose Barb
Connector(s) Inlet: 1 ½" Sanitary | Outlet: ½" Hose Barb
Maximum Allowable Back Pressure 2 bar (29 psi) at 20°C | 1.5 bar (21.8 psi) at 50°C
Maximum Differential Pressure 20°C: 5 bar, 50°C: 3 bar
Maximum Operating Pressure 5 bar (72.5 psi)
Maximum Diffusion 23 mL/min at 2.5 bar | 36 psi at 20°C
Minimum Required Bubble Point 3.2 bar | 46 psi

품질 및 규제 정보

항목 사양
Bacterial Endotoxins < 0.25 EU/mL as determined by the LAL test
Extractables The total amount of extractables is well below the limits established by the current USP under "Sterile Water for Injection".
Non-Fiber Releasing This filter product complies with Title 21 of the Code of Federal Regulations (CFR), sections 210.3(b)(6) and 211.72.

멸균 정보

항목 사양
Sterilization Method Autoclavable & Gamma Irradiatable
Sterilization Procedures Autoclaving: at 134°C, 30 min, 2 bar, min. 5 cycles | Gamma Irradiation: with 50 kGy, 1 cycle

제품 이미지

Sartorius 상품 둘러보기

전체보기

문의

0개

아직 등록된 문의가 없어요.