CacheBy
Sartoguard PES | 0.2 µm | Maxicaps® (Production | Large Scale) (5478307F1G-SO)
AI 생성AI가 생성·보정한 이미지예요. AI는 실수할 수 있으니 실제 제품과 다를 수 있어요.
1 / 2

Sartoguard PES | 0.2 µm | Maxicaps® (Production | Large Scale) (5478307F1G-SO)

상품 한눈에 보기

대규모 생산 공정용 Sartoguard PES Maxicaps® 필터 0.2 µm PES 멤브레인과 1.2 µm 프리필터 구성 최대 2.4 m² 멤브레인 면적으로 고용량 처리 지원 오토클레이브 및 감마선 멸균 가능 mAb 생산, 배지 여과 및 수확물 처리에 적합

브랜드
Sartorius
카테고리
Sterile Filters
판매단위
10"(0.8 m² / 8.6 ft²)
카탈로그 보기

카탈로그

1개 옵션
회원가입 없이 바로 구매하세요
가입하지 않아도 비회원가로 구매하실 수 있습니다.
Sartoguard PES | T-Style Maxicaps® | 0.2µm | 10", 10"(0.8 m² / 8.6 ft²) | Sartoguard PES T-Style Caps_0.2µm_10''판매 단위 10"(0.8 m² / 8.6 ft²) ·
재고 확인 필요
534,000원VAT 포함 587,400원

Sartorius · Sartoguard PES | 0.2 µm | Maxicaps® (Production | Large Scale) (5478307F1G-SO)

Tailored for large-scale production, Maxicaps® offer high throughput and excellent clarification for media and clarified harvests. With membrane areas up to 2.4 m², they support high-volume processing with reliable bioburden reduction.

Applications

항목 사양
Application mAB Production | Protection of Final Filters
Industry Pharma / Biotech
Modality Media Filtration | Harvest | Cell Removal | Filtration after Virus Inactivation
Scale Production | Large Scale

제품 사양

항목 사양
Brand Sartoguard PES
Membrane Material Polyethersulfone (PES)
Pore Size Final-filter 0.2 µm
Pore Size Pre-filter 1.2 µm
Filter Size 10" (0.8 m² / 8.6 ft²)
Capsule/Cartridge Format T-Style Maxicaps®
Type T-Style (Autoclavable | γ-irradiatable)
Housing Material Polypropylene (PP)
Support Fleece Polyester (PET)
Material o-ring | seal Silicone (SI)
Pack Size 1
Delivery Condition Non-Sterile

성능 및 연결 사양

항목 사양
Maximum Diffusion 18 mL/min at 1.2 bar | 17.5 psi
Minimum Required Bubble Point 1.8 bar | 26 psi
Maximum Differential Pressure 20 °C: 5 bar, 50 °C: 3 bar
Vent Valve Standard
Connector Inlet 1.5" Tri-clamp 50.5 mm
Connector Outlet 1/2" Single Stepped Hose Barb
Connector(s) Inlet: 1 ½" Sanitary | Outlet: ½" Hose Barb

품질 및 추출물 정보

항목 사양
Bacterial Endotoxins < 0.25 EU/mL as determined by the LAL test
Extractables The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
Non-Fiber Releasing This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.

멸균 정보

항목 사양
Sterilization Method Autoclavable & Gamma Irradiatable
Sterilization Procedures Autoclaving: at 134°C, 30 min, 2 bar | Gamma Irradiation: with 50 kGy

제품 이미지

Sartorius 상품 둘러보기

전체보기

문의

0개

아직 등록된 문의가 없어요.