원본
Sartoguard PES | 0.1 µm | Maxicaps® (Production | Large Scale) (5477358G1G-OO)
상품 한눈에 보기
대규모 생산용 Sartoguard PES Maxicaps® 필터 0.1 µm PES 멤브레인으로 미디어 및 정제 수확물 여과 최대 2.4 m² 멤브레인 면적과 높은 처리량 지원 감마선 조사 가능, 비멸균 공급
- 브랜드
- Sartorius
- 카테고리
- Sterile Filters
- 판매단위
- 10"(0.8 m² / 8.6 ft²)
카탈로그
1개 옵션 · 카탈로그 번호를 클릭하면 복사됩니다회원가입 없이 바로 구매하세요
가입하지 않아도 비회원가로 구매하실 수 있습니다.
카탈로그 번호 · 상품 설명출고판매가담기
ADADRepligen 웨비나PATsmart를 활용한 바이오공정 분석 전략 · 10/7 오전 10시자세히보기Sartoguard PES | Gamma Maxicaps® | 0.1µm | 10", 10"(0.8 m² / 8.6 ft²) | Sartoguard PES MaxiCaps_0.1µm_10"판매 단위 10"(0.8 m² / 8.6 ft²) ·
재고 확인 필요
483,000원VAT 포함 531,300원
Sartorius · Sartoguard PES | 0.1 µm | Maxicaps® (Production | Large Scale) (5477358G1G-OO)
Tailored for large-scale production, Maxicaps® offer high throughput and excellent clarification for media and clarified harvests. With membrane areas up to 2.4 m², they support high-volume processing with reliable bioburden reduction.
Applications
| 항목 | 사양 |
|---|---|
| Application | mAB Production | Protection of Final Filters |
| Modality | Media Filtration | Buffer & Auxiliaries Filtration | Downstream Intermediates | Form & Fill |
| Scale | Production | Large Scale |
Product Specifications
| 항목 | 사양 |
|---|---|
| Brand | Sartoguard PES |
| Capsule/Cartridge Format | Maxicaps® |
| Filter Size | 10" (0.8 m² / 8.6 ft²) |
| Membrane Material | Polyethersulfone (PES) |
| Pore Size Final-filter | 0.1 µm |
| Pore Size Pre-filter | 0.8 µm |
| Housing Material | Polypropylene (PP) |
| Support Fleece | Polyester (PET) |
| Material o-ring | seal | Silicone (SI) |
| Type | Inline (γ-irradiatable) |
| Pack Size | 1 |
| Delivery Condition | Non sterile - Gamma irradiatable |
| Sterilization Method | Gamma Irradiatable |
| Sterilization Procedures | Gamma Irradiation: with 50 kGy |
Performance and Operating Specifications
| 항목 | 사양 |
|---|---|
| Bacterial Endotoxins | < 0.25 EU/mL as determined by the LAL test |
| Extractables | The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection". |
| Maximum Diffusion | 25 mL/min at 1.5 bar | 22 psi |
| Minimum Required Bubble Point | 2.8 bar | 40.5 psi |
| Maximum Differential Pressure | 20 °C: 5 bar, 50 °C: 3 bar |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Vent Valve | Standard |
Connections
| 항목 | 사양 |
|---|---|
| Connector Inlet | 1/2" Single Stepped Hose Barb |
| Connector Outlet | 1/2" Single Stepped Hose Barb |
| Connector(s) | Inlet: ½" Hose Barb | Outlet: ½" Hose Barb |
Sartorius 상품 둘러보기
전체보기
문의
0개 · 배송·재고 문의는 실시간 상담이 빠릅니다아직 등록된 문의가 없어요.