AI 생성AI가 생성·보정한 이미지예요. AI는 실수할 수 있으니 실제 제품과 다를 수 있어요.
1 / 2Sartopore® 2 | 0.2 µm | Maxicaps® (Production | Large Scale) (5448307H1G-SO)
상품 한눈에 보기
대규모 생산용 0.2 µm 멸균 여과 Maxicaps® 0.6 m² PES 멤브레인과 0.45 µm 프리필터 적용 제약·바이오 공정의 버퍼 및 보조액 여과 고유량·고용량 설계, 오토클레이브 및 감마선 멸균 가능 비멸균 상태로 공급
- 브랜드
- Sartorius
- 카테고리
- Sterile Filters
- 판매단위
- 10"(0.6 m² / 6.5 ft²)
카탈로그
1개 옵션 · 카탈로그 번호를 클릭하면 복사됩니다회원가입 없이 바로 구매하세요
가입하지 않아도 비회원가로 구매하실 수 있습니다.
카탈로그 번호 · 상품 설명출고판매가담기
Sartopore® 2 | T-Style Maxicaps® | 0.2µm | 10", 10"(0.6 m² / 6.5 ft²) | Sartopore2 T-Style Caps_0.2§_10''판매 단위 10"(0.6 m² / 6.5 ft²) ·
재고 확인 필요
534,000원VAT 포함 587,400원
Sartorius · Sartopore® 2 | 0.2 µm | Maxicaps® (Production | Large Scale) (5448307H1G-SO)
Tailored for large-scale production, Sartopore® 2 Maxicaps® offer exceptional filtration capacity and efficiency. Their robust construction and high flow rates make them ideal for demanding industrial applications.
Applications
| 항목 | 사양 |
|---|---|
| Application | High capacity platform for conventional sterile filtration |
| Industry | Pharma / Biotech |
| Modality | Buffer & Auxiliaries Filtration |
| Scale | Production | Large Scale |
| Bacterial Retention | Quantitative Retention of 1 × 10⁷ CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology |
| Bacterial Endotoxins | < 0.25 EU/mL as determined by the LAL test |
| Biological Reactivity | All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests). |
| Extractables | The total amount of extractables is well below the limits established by the current USP under “Sterile Water for Injection”. |
| Connector Inlet | 1.5" Tri-clamp 50 mm |
| Connector Outlet | 1/2" Single Stepped Hose Barb |
| Connector(s) | Inlet: 1 ½" Sanitary | Outlet: ½" Hose Barb |
| Filter Size | 10" (0.6 m² / 6.5 ft²) |
| Filtration Area | 0.6 m² |
| Outer Diameter | 170 mm (110.4 mm without Connection / Valves) |
| Capsule/Cartridge Format | T-Style Maxicaps® |
| Maximum Allowable Back Pressure | 2 bar (29 psi) at 20°C | 1.5 bar (21.8 psi) at 50°C |
| Maximum Diffusion | 18 mL/min at 2.5 bar | 36 psi at 20°C |
| Minimum Required Bubble Point | 3.2 bar | 46 psi |
| Vent Valve | Standard |
| Housing Material | Polypropylene (PP) |
| Material O-ring / Seal | Silicone (SI) |
| Membrane Material | Polyethersulfone (PES) |
| Support Fleece | Polyester (PET) |
| Maximum Differential Pressure | 20°C: 5 bar, 50°C: 3 bar |
| Maximum Operating Pressure | 5 bar (72.5 psi) |
| Non-Fiber Releasing | This filter product complies with Title 21 of the Code of Federal Regulations (CFR), Sections 210.3(b)(6) and 211.72. |
| Pore Size, Final Filter | 0.2 µm |
| Pore Size, Pre-filter | 0.45 µm |
| Brand | Sartopore® 2 |
| Pack Size | 1 |
| Type | T-Style (Autoclavable | γ-irradiatable) |
| Delivery Condition | Non-Sterile |
| Sterilization Method | Autoclavable & Gamma Irradiatable |
| Sterilization Procedures | Autoclaving: 134°C, 30 min, 2 bar, minimum 5 cycles | Gamma irradiation: 50 kGy, 1 cycle |
제품 정보
| 항목 | 내용 |
|---|---|
| 제품명 | Sartopore® 2 | 0.2 µm | Maxicaps® (Production | Large Scale) |
| 제품 번호 | 5448307H1G-SO |
| 공급업체 | Sartorius |
제품 이미지
Sartorius 상품 둘러보기
전체보기
문의
0개 · 배송·재고 문의는 실시간 상담이 빠릅니다아직 등록된 문의가 없어요.