
원본
Sartopore® 2 XLG | 0.2 µm | Maxicaps® (Production | Large Scale) (5447307G2--FF)
상품 한눈에 보기
대규모 생산용 0.2 µm 멸균 여과 Maxicaps® 1.6 m² 필터 면적과 높은 여과 용량 제약·바이오 공정의 배지·버퍼·다운스트림 여과에 적합 PES 멤브레인 및 PP 하우징 134°C, 30분 기준 최소 25회 오토클레이브 가능
- 브랜드
- Sartorius
- 카테고리
- Sterile Filters
- 판매단위
- 20"(1.6 m² / 17.2 ft²)
카탈로그
1개 옵션 · 카탈로그 번호를 클릭하면 복사됩니다회원가입 없이 바로 구매하세요
가입하지 않아도 비회원가로 구매하실 수 있습니다.
카탈로그 번호 · 상품 설명출고판매가담기
ADADRepligen 웨비나PATsmart를 활용한 바이오공정 분석 전략 · 10/7 오전 10시자세히보기Sartopore® 2 XLG | Maxicaps® | 0.2µm | 20", 20"(1.6 m² / 17.2 ft²) | Sartopore 2 XLG MaxiCaps_0.2µm_20'' (SAP 품번 5447307G2-FF)판매 단위 20"(1.6 m² / 17.2 ft²) ·
재고 확인 필요
1,204,000원VAT 포함 1,324,400원
Sartorius · Sartopore® 2 XLG | 0.2 µm | Maxicaps® (Production | Large Scale) (5447307G2--FF)
Sartopore® 2 XLG Maxicaps®는 대규모 생산을 위해 설계된 고용량·고효율 여과 제품으로, 까다로운 산업용 애플리케이션에서 안정적인 성능을 제공합니다.
Applications
| 항목 | 사양 |
|---|---|
| Application | High capacity platform for conventional sterile filtration |
| Industry | Pharma / Biotech |
| Modality | Media Filtration | Buffer & Auxiliaries Filtration | Downstream Intermediates | Filtration after Virus Inactivation | Form & Fill |
| Scale | Production | Large Scale |
Product Specifications
| 항목 | 사양 |
|---|---|
| Brand | Sartopore® 2 XLG |
| Capsule/Cartridge Format | Maxicaps® |
| Filter Size | 20" (1.6 m² / 17.2 ft²) |
| Pore Size Final-filter | 0.2 µm |
| Pore Size Pre-filter | 0.8 µm |
| Membrane Material | Polyethersulfone (PES) |
| Housing Material | Polypropylene (PP) |
| Support Fleece | Polypropylene (PP) |
| Material o-ring | seal | Silicone (SI) |
| Type | Inline (Autoclavable) |
| Pack Size | 1 |
| Delivery Condition | Non sterile - Autoclavable |
| Sterilization Method | Autoclavable |
Performance and Operating Conditions
| 항목 | 사양 |
|---|---|
| Bacterial Endotoxins | < 0.25 EU/mL as determined by the LAL test |
| Extractables | The total amount of extractables is well below the limits established by the current USP under "Sterile Water for Injection". |
| Maximum Diffusion | 46 mL/min at 2.5 bar | 36 psi at 20 °C |
| Minimum Required Bubble Point | 3.2 bar | 46 psi |
| Maximum Differential Pressure | 20 °C: 5 bar, 50 °C: 3 bar |
| Maximum Operating Pressure | 5 bar (72.5 psi) |
| Vent Valve | Standard |
| Non-Fiber Releasing | This filter product complies with Title 21 of the Code of Federal Regulations (CFR), sections 210.3(b)(6) and 211.72. |
Connections
| 항목 | 사양 |
|---|---|
| Connector Inlet | 3/4" Sanitary |
| Connector Outlet | 3/4" Sanitary |
| Connector(s) | Inlet: ¾" Sanitary | Outlet: ¾" Sanitary |
Sterilization Procedures
- Autoclaving: at 134°C, 30 min, 2 bar, min. 25 cycles
Sartorius 상품 둘러보기
전체보기문의
0개 · 배송·재고 문의는 실시간 상담이 빠릅니다아직 등록된 문의가 없어요.