L/S Digital Console Process Drives

주요특징

• Transfer, dispense, and meter in lab, process and washdown environments
• IP66 and NEMA 4X rated. Sealed housing and sealed keypad are protected from dust, water, and chemicals in the wash-down environment---simply hose down to clean.
• Available with either a 316 SS or a powder-coat steel housing
• Flow rate:0.006 to 3400 mL/min with L/S tubing
• Graphical LCD shows six different parameters: motor rpm, flow rate, dispense volume, cumulative volume, dispense interval time, and copy number.
• Brushless, maintenance-free motor with ±0.1% speed control accuracy and a 6000 to 1 turndown ratio
• Dispense by: volume---in milliliters (0.001 to 99,999), liters, and gallonscopy---1 to 99,999 dispense cycles. Set time interval of on/off cycles 1 sec to 99 hr, 59 min, 59 sec.
• Remote control capabilities via 31-pin circular waterproof connection
• 77975-25, 77975-35, 77975-45

L/S® Digital Console Process Drives
Transfer, dispense, and meter in lab, process and washdown environments

**
Description**

• IP66 and NEMA 4X rated. Sealed housing and sealed keypad are protected from dust, water, and chemicals in the washdown environment—simply hose down to clean.
• Available with either a 316 SS or a powder-coat steel housing
• Flow rate: 0.006 to 3400 mL/min with L/S tubing
• Graphical LCD shows six different parameters: motor rpm, flow rate, dispense volume, cumulative volume, dispense interval time, and copy number.
• Brushless, maintenance-free motor with ±0.1% speed control accuracy and a 6000 to 1 turndown ratio
• Dispense by: volume—in milliliters (0.001 to 99,999), liters, and gallonscopy—1 to 99,999 dispense cycles. Set time interval of on/off cycles 1 sec to 99 hr, 59 min, 59 sec.
• Remote control capabilities via 31-pin circular waterproof connection

What’s included : 6-ft (1.8-m) line cord—features IEC 320/CEE 22 connector couplerwatertight cord connection. Please specify destination country when ordering drive is shipped with country-specific plug/cord set

**

**

​GY-07575-84 Washdown foot switch, momentary start/stop`6-ft (1.8-m) cable

​GY-07575-80 Cable assembly, 31-pin round connector and 25-ft (7.9-m) cable with stripped wire ends for remote control

​GY-17050-01 NIST-traceable calibration with data for peristaltic pump drive