50 mm Vent Filter
50 mm Vent Filter
Membrane Materials: hydrophobic PTFE reinforced with polypropylene
Housing: Polypropylene Ultrasonically weldedFilter Area: 19.6 cm2
Air Flow Rate: 27L and 32L /min@1bar
Outer Diameter: 60 mm
Overall Length: 63 mm
Maximum Operating Pressure: 3.5 bar
- PTFE membrane and polypropylene housing have broad chemical resistance
- Large surface area provides greater throughput and high air flow rate
- Reusable and autoclavable
- Hose barb connection inlet /outlet (6-12mm)
- Sterile venting of filling vessels and carboys
- Autoclave venting
- Low volume sterile filtration of non-aqueous fluids
- In-line sterilization of and particulate removal from air and gases
|VF50ANPPT002AC01||50 mm Vent Filter, PTFE 0.20 µm|
|VF50ASPPT002AX01||50 mm Vent Filter, PTFE 0.20 µm - Sterile|
|VF50ASPPT004AX01||50 mm Vent Filter, PTFE 0.45 µm - Sterile|
|VF50ANPPT004AC01||50 mm Vent Filter, PTFE 0.45µm|
|기본 배송비||교환/반품 배송비|
결제 및 환불 안내
교환 및 반품 접수
|교환 및 반품 접수 기한|
|교환 및 반품 접수가 가능한 경우|
|교환 및 반품 접수가 불가능한 경우|
교환 및 반품 신청
라프바이오텍의 다른 상품들
CellGyn™ – TPE Bio-Pharm Tubing ADIF USP Class VI Weldable Made in USA Flexible TPE Tubing c-flex CellGyn™ TPE tubing is designed specifically for the most dema...
Kynar® PVDF 90° Elbow Adapter: Compression Fitting X FNPT Kynar PVDF Compression Fitting 90 Degree Elbow Female NPT F-NPT Part Number Tub...
50 mm Vent Filter - Vent Filters 50 mm Vent Filter Membrane Materials: hydrophobic PTFE reinforced with polypropylene Housing: Polypropylene Ultrasonically weldedFilter Area: 19.6 cm2 Air Flow ...
These PTFE filters protect downstream instruments from particulate damage and offer a high purity flow path. There are versions with 1/4″-28 UNF ports to take fittings such as the Omni-Lok or barbed fittings for softwall tubing. A version is availabl...
These adaptors can replace the Omnifit® cap to give either quick push-on connections for softwall tubing or luer connections. Cap to luer adaptors are available with male or female luer connections. Cap to pipe adapters are available in ETFE or stain...